Home/Solutions/Acoustic communications gateway

An acoustic communications gateway that goes to the node

Your subsea instruments and vehicles talk by acoustic modem. A Scout USV carries a matching modem to them, holds station overhead and relays data up and commands down over satellite, with no crewed vessel and no gateway buoy.

The surface end of the acoustic link

Sound is the only practical way to communicate through water over distance, so seabed sensors, landers and underwater vehicles carry acoustic modems. The difficulty is the other end of the link. Something has to sit at the surface with a compatible modem in the water and a radio or satellite link in the air. Today that is usually a crewed vessel at tens of thousands of pounds per day, or a gateway buoy moored at every site.

A Scout USV does the same job as a mobile surface gateway. It launches from shore, transits to the node, holds position above it and bridges the underwater acoustic network to Iridium and Starlink satellite.

Data up

Scout interrogates seabed instruments and vehicles acoustically and forwards their data to your dashboard or API over satellite.

Commands down

Operators on shore send commands through Tether to Scout, which passes them through the modem to the equipment below.

Position

With a USBL system fitted, Scout tracks underwater vehicles and reports their position to shore in real time.

Modems and positioning systems

An acoustic link only works if both ends speak the same protocol, so the gateway has to carry the make of modem your subsea equipment already uses. Scout has carried acoustic modems from Sonardyne and Subnero, and Sonardyne USBL positioning for tracking underwater vehicles. Other makes can be integrated in the open payload bay. Tell us which modem you run and we will confirm the fit.

Payload capacity30 kg
Payload electronics bay40 cm × 40 cm
Transducer mountingBelow the surface
Payload power24 V regulated, up to 200 W peak
Payload dataEthernet
BackhaulIridium + Starlink
PropulsionSolar-electric, no engine
Station keepingVirtual anchor, for months
LaunchOne person, from shore

Data rate, range and latency are set by the modem, the water depth and the conditions, as with any acoustic link. Scout's part is to put the transducer in the right place and keep it there: it can hold position close to the node to shorten the acoustic path, and its electric drive means there is no engine or generator running beside the transducer.

What it is used for

Against a gateway buoy or a vessel visit

A gateway buoy gives a permanent link at one site, at the price of a mooring, a vessel to install it and a vessel to service it. A crewed vessel can visit any site, but charges a day rate for every day it is there. Scout sits between the two. It needs no mooring, it moves between nodes under its own power, and it costs from £40,000 per unit to buy, or nothing up front as data-as-a-service. One vehicle can loiter over a single node for weeks or visit a series of nodes in turn. The ocean data cost page compares the methods.

Two-wayData up, commands down
No mooringMoves between nodes
MonthsOn station

Common questions

What is an acoustic communications gateway?

An acoustic communications gateway is a surface platform that carries an acoustic modem below the waterline and a satellite or cellular link above it. It passes data and commands between instruments or vehicles under water, which can only communicate by sound, and operators on shore.

Which acoustic modems can Scout carry?

Scout has carried acoustic modems from Sonardyne and Subnero, and Sonardyne USBL positioning. Scout takes up to 30 kg of payload, with a 40 cm x 40 cm bay for electronics, transducer mounting below the surface, 24 V regulated power up to 200 W peak and an Ethernet connection, so other makes of modem can be integrated. Tell us which modem your subsea equipment uses and we will confirm the fit.

Can a USV replace a gateway buoy?

For many jobs, yes. A gateway buoy serves one site and needs a mooring and a vessel to install and service it. A Scout USV holds position over a subsea node as a virtual anchor for months, then moves to the next node on command, so one vehicle can serve several sites with no mooring.

How do I get data from seabed acoustic modems to shore without a vessel?

Send a USV that carries a compatible modem. Scout launches from shore, transits to the site, holds station above the instrument, exchanges data with it acoustically and forwards that data to shore over Iridium or Starlink satellite. No crewed vessel has to visit the site.

Can Scout send commands down to subsea equipment as well as bring data up?

Yes. The link is two-way. Operators on shore send commands through Tether, our web-based control platform, over satellite to Scout, which passes them through the acoustic modem to the instrument or vehicle below. Customers use this to re-task underwater vehicles during a mission.

How long can Scout stay on station as a gateway?

Scout is solar-electric and designed to stay at sea for months. It needs no fuel and no support vessel, so it can loiter over one node for weeks or visit a series of nodes in turn.

Tell us which modem you run

Start a conversation →